Cyber Controller Manual de instrucciones

Cyber Controller INSTRUCTION MANUAL Please read this manual thoroughly before use and keep it handy for future reference.

3. INSTALLATION & CONFIGURATION 3.3 The Example of Multi Configuration 10

4. OPERATING CONTROLS 4.1 Front View ① LED Indicator ⑨ PTZ Keypad ② DVR Keypad ⑩ Joy Stick ③ DVR Playback ⑪ Controller Keypad ④ J

4. OPERATING CONTROLS 4.2 Rear View ① RS-232 : This connector port is provided to connect the external modem for remote monitori

4. OPERATING CONTROLS 4.3 Operation by Part LEDs Part CAM : The Camera status indication. DVR : The DVR status Indication. MON : The Monitor(Matrix s

4. OPERATING CONTROLS DVR Search Part SEARCH : It is used to search the stored video data. ▶/ ll : It is used to activate the searched video data or

4. OPERATING CONTROLS PTZ Camera Function Part PRESET : It is used to set the Preset function. TOUR : It is used to set the Tour function. PTRN : I

5. OPERATION 5.1 Power Turn on the controller power after all domes have initialized (wait at least 30 seconds) 1. Input 12VDC 1A to the Cyber contr

5. OPERATION * How to control On-Screen Menu Utility Action Function SETUP button Call the controller SETUP menu. Joystick right Go into the sub-

5. OPERATION 5.3.2 PASSWORD SETUP When you want to change the password, you can change the password in password setup menu. The unit requ

5. OPERATION 5.3.3 BACKLIGHT TIME SETUP You may determine backlight turn-on time. BACKLIGHT TIME: 011 While th

WARNINGS and CAUTIONS WARNINGS x TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK. - DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. - DO NOT INSERT ANY

5. OPERATION 5.3.6 CAMERA SETUP Set up Camera ID Range, the Protocol , Baud Rate of the Camera, and Output Port. You can select Individual Setup or

5. OPERATION ○4 PORT Setting: In the Camera ID Range, You need to select the port. To navigate and choose the Baud Rate, push the joystick left/righ

5. OPERATION 5.3.7 DVR SETUP Set up DVR ID Range, the Protocol , Baud Rate of the DVR, and Output Port. You can select Individual Setup or Whole Se

5. OPERATION ○4 PORT Setting : In the DVR ID Range, You need to select the port. To navigate and choose the Baud Rate, push the joystick left/right

5. OPERATION 5.4 LOCK If you don’t want another person (not authorized) to manipulate the controller, you can lock the Cyber controller by pressin

6. DIMENSION A. Cyber Controller B. Junction Box 25

7.SPECIFICATION Model Name Cyber Controller Screen 4 Line LCD Jog Shuttle Built-In Controls 3X Axis Joy Stick Built In Pan/Tilt Pan : Left/R

APPENDIX B - The List of GLB(Short) Key If you use Cyber Scan dome camera and Cyber controller, you can use the following GLB short cut key for the

APPENDIX B - The List of GLB(Short) Key 77 Area Title On/Off Toggle 78 Operation Title On/Off Toggle 79 Flag Display On/Off Toggle 80 Time Display

APPENDIX B - Trouble Shooting If problems occur, verify the installation of the camera with the instructions in this manual and with other operating

COMPLIANCE STATEMENT FCC INFORMATION : THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE, PURSUANT TO

APPENDIX C-OPTIONAL ITEM A. Cyber Scan Dome Camera B. Cyber Scan Pre-Pack Dome Camera C. Digital Video Record

MEMO 31

IMPORTANT SAFEGUARDS  Please install the product on a completely flat floor. - Always check the strength and stability of the installation locatio

TABLE of CONTENTS WARNINGS AND CAUTIONS 2 COMPLIANCE STATEMENT

1. INTRODUCTION The Cyber Controller, Cyber Scan Dome, Video Matrix System & Digital Video Recorder make up the building blocks for any surveill

1. INTRODUCTION 3) Video Matrix System (16Ch, 32Ch) ＊ 16Ch Input 4 Monitor Output / 32Ch Input 8 Monitor Output ＊ 16Ch Alarm Input (1U, Alarm Dev

3. INSTALLATION & CONFIGURATION 3.1 Basic Configuration of DVR & Cyber Controller 8 Junction Box

3. INSTALLATION & CONFIGURATION 3.2 Basic Configuration of Matrix System & Cyber Controller 9 Junction Box